New Hampshire motorists in Violation of the Law
New Hampshire motorists who use drive time to chat on the phone, read the paper or apply makeup may want to focus on the road.
In that state, if you cause harm to another vehicle or a pedestrian while engaged in an activity behind the wheel, you face a maximum fine of $1,000 and lose your license for up to a year.
“This is a good deterrent to have on the books,” says Peter M. Thomson, coordinator of New Hampshire’s Highway State Agency. “I travel 65 miles to work, on Interstate 93, and I see a ton of distracted drivers. You name it, and I have seen it. It drives me crazy to see people trying to drive with a full plate of food on their lap while trying to steer with their knees.”Visit this website
New Hampshire’s no-nonsense law carries the greatest fine and penalty of the nine states with the harshest laws for distracted drivers on our list.
Distraction Equals Accidents
Almost 80% of crashes and 65% of near-crashes involved some form of driver inattention within three seconds of the event, according to the 100-Car Naturalistic Driving Study, conducted by the Virginia Tech Transportation Institute and the National Highway Traffic Safety Administration (NHTSA) and released in April 2006.
The most common distraction cited was cellphone use (followed by drowsiness).
Bans on using a handheld cellphone while driving are in the works in several states, including California, which on July 1 will become the latest state to ban cellphone use, joining New York, Washington, D.C., Connecticut and New Jersey–though hands-free phones will still be permitted. This will be a primary offense, meaning police officers can ticket motorists talking on a handheld phone even if they haven’t violated other traffic laws.
Connecticut bans the use of handheld cellphones, yet goes a step further by prohibiting the use of other electronic devices, such as personal digital assistants. New Jersey does the same and adds text messaging to its list of specific offenses. Washington State banned text messaging in January and, come July 1, will prohibit the use of handheld cellphones in general.
Ohio is the only state on the list that doesn’t ban using cellphones while driving. But, in Ohio, it is a primary offense to drive while wearing earphones or earplugs for listening to devices such as iPods or CD players (though ear-in devices for cellphones are permitted). This law has been on the books since 1989. Violators are cited for committing a minor misdemeanor, which carries a maximum fine of $1,000, says Bradley Shaw, a spokesman for the Ohio State Highway Patrol. The amount of the ticket varies by county and is determined by your driving record, prior convictions and other moving violations.
While other states are debating bans on cellphones, text messaging and other distractions, lawmakers and auto safety agencies continue to review the best ways to deal with people who insist on multitasking while driving.
Like New Hampshire, Utah prohibits multiple activities that it deems distracting, like smoking, eating, drinking and “physically attending to a passenger.” The maximum fine is $50 on top of fines incurred for related moving violations, such as running a red light or causing an accident.
Rules For Hands-Free Phones
No state has entirely banned the use of cellphones while driving; you can still use hands-free wireless devices, but the rules aren’t the same for all drivers. Seventeen states and the District of Columbia have various levels of restrictions for all cellphone use, hands-free included, for teens age 18 and younger, according to the Insurance Institute for Highway Safety.
For now, drivers over the age of 18 with full driving privileges can use hands-free communication devices, even in the states that ban handheld electronics. But this is something that Clarence Ditlow, executive director of the Center for Auto Safety, a Washington-based consumer watchdog for auto safety and quality founded by Ralph Nader in 1970, is fighting to change.
In March, the CAS filed a petition with the NHTSA, asking the agency to write rules prohibiting the use of interactive systems that allow drivers to have wireless access to e-mails and phone calls. “There is a false perception that hands-free phones are better,” says Ditlow. “Your mind is still off the road and focused on the conversation.”
When Washington’s ban on text messaging goes into effect July 1, it will be a secondary offense; you’ll only receive a ticket if you commit another moving violation, other than speeding. Though the same holds true for distracted-driver laws in several states, it pays to play it safe. In Connecticut and New Hampshire, for example, the fines and license-suspension terms go up with each offense.
However, you don’t have to worry about inadvertently breaking the law when commuting across state lines: The Insurance Institute for Highway Safety ( www.iihs.org) and AAA publish a state-by-state listing of cellphone bans and distracted-driving laws.
Shopping for vintage t-shirts is a way to remind the ancient times. It’s a pretty fashionable item among young people.
Vintage t-shirt is matchless designs and previous t-shirt that may or May not worn today. A vintage brand separates among innovative and previous designs in judgment to modern fashion. Containing a unique extraordinary style, they have a top worth. Vintage t-shirts may not essentially be prepared of comprehensible material. They typically have a little low lighten, show several types of retro symbol, character or other photos and seem like amazing you’ve hold and precious for years. However vintage t-shirts don’t have to be older. You can acquire latest vintage fashion t-shirts in a vast assortment of modes. So if you desire to have a vintage t-shirt, shopping for a fresh one is an immense option.
Prospective consumers may desire to buy vintage shirts from neighboring retail stores, online stores, vintage apparel shops and boutiques. Earlier to ordering a purchase, it is wise to authenticate the trustworthiness of these stores in order to make certain an assured product. Assured stores present vintage t-shirts that are unique t-shirt styles from an earlier period. Vintage t-shirts are vacant in different kinds. In types of vintage t-shirts include sports celebrity, soccer player, movie, actor, actress and singers prints that are motionless in require.
Vintage t-shirts are offered in different sizes to accommodate to all aged people. They can be carried as a style declaration, to show group faithfulness or just reserved away as a precious product. Their value differences depend on the reputation of the designs, sizes and fabrics employed to produce the vintage shirts. Popular cartoons character, music band group and animals are most demanding vintage styles.
There is nearly as many diverse vintage t-shirts exist to pick from as there are wearer to carry them so it is suggested that you initially make your mind up, usually, what you desire to have on your t-shirt. Maybe you wish for a traditional Star Wars or your favorite music band monogram on your t-shirt. Selecting your topic will assist you spotlight on your preference instead of being besieged by a lot of selections.
If you have selected on an idea you’ll be prepared to purchase, but from where to start. Internet shopping is grand for discovering individual products as per your demand and imagination and there are too many famous web stores to pick from. You’re possible to locate the most excellent deals on vintage t-shirts online beside with the finest choice. Make a search on top search engine or ebay, amazon and others top shopping site search should assist straightly you to discover the top resources for what you are seeking to purchase for.
There is another one matter you have to fix about before make your purchase, get idea of your body measurement. To confirm you will purchasing one that will fit accurately. Be certain to verify the size chart on the online shopping website you are shopping on to settle on which size will match best.
With these simple strategies you will have no difficulty to discovering the ideal vintage t-shirt for you by shopping online. To take full advantage of your buying knowledge, aim to give a slight concentration to the style of item you are seeking at and the fabric it is produced from.
Our company SA Air Conditioning bases its home comfort systems largely on heating methods imported from Europe, where regulatory conditions and the scarcity of fossil fuels have led to the development of the world’s most sophisticated and energy efficient technology available today.
Europeans have enjoyed the quality and comfort of radiant heating for more than 30 years, perfecting not only the technology but the installation methods also.
Rather than viewing each mechanical component of a home separately, Europeans integrate all components into one combined system, providing homeowners the ultimate in quality, comfort, safety and efficiency.
This is called the whole house approach.
The Whole House Approach
Each house is a system of finely-tuned, integrated parts.
When functioning at peak performance, each component works in unison.
On the other hand, a weakness in just one component can compromise the comfort and quality of an entire home.
For example, failing to insulate a home using the best methods and materials properly can result in compromised performance in the entire heating system, from the boiler’s ability to generate heat efficiently to the chimney’s ability to exhaust toxic gases like carbon monoxide.
The performance of each and every component depends on their integration into one singular system, the whole house.
The Physics of Radiant Heat
Radiant heat travels in all directions.
Much like the heat of the sun, radiant systems heat objects and people, not just the surrounding air.
Think about being outside on a freezing 20-degree day and walking on the shady side of the street.
When you go to the sunny-side of the street you suddenly feel warmer.
When the floor is heated from the water in the tubing, the floor becomes the radiator and releases heat waves to your body and the surrounding objects, giving the sensation and comfort of warmth.
This simple principle allows temperatures in a radiant-heated room to be set lower, lowering fuel consumption and actually improving comfort.
In a properly installed radiant heating system, floor temperatures rise to no more than 85 degrees. This assures maximum comfort safety, and protects the floors from damage due to drying.
Temperatures above this can cause overheating, sweating of feet and decreased system efficiency.
Designing the system
A well-engineered radiant system should be designed to operate using lower water temperatures, maximizing overall efficiency and comfort.
Designing a system requires careful analysis of the many factors that effect heat output.
These factors include:
Water temperature
Tube spacing
Floor covering
Floor surface area
Insulation and ventilation
Outdoor temperatures
Equipment (boiler size, etc)
While most of these factors can be controlled, one factor that usually can’t be is the size of the floor surface.
Depending on the heat-loss of the room, the possibility exists that there may not be enough floor surface-area to heat the room sufficiently.
In this is the case, walls or ceilings can be utilized for radiant heat by installing a climate panel or Thermalboard system.
Tubing:
The most widely used tubing in Europe is called PEX (cross-linked polyethylene).
This flexible plastic tubing was originally designed for the telecommunications industry to lay the trans-Atlantic cable.
PEX has been in use for over 30 years, and as a result of rigid, ongoing testing, it has been shown to have a life expectancy of over 200 years.
PEX tubing is becoming the material of choice in the U.S., versus rubber tubing, which is prone to rapid deterioration.
Another type of tubing that is catching on is PEOC made of Dowlex PE-RT resins.
It is a flexible, easy to handle, five layer tubing with a built-in oxygen barrier.
Boilers – Heating the water:
There are a variety of ways in which to heat the water for your radiant system:
Boilers
Ground Source Heat Pumps
Wood Boilers
Dedicated Water Heaters
Important Considerations:
The device should be able to withstand lower water temperatures associated with radiant heat. If not, systems or provisions should be made to address this issue.
Offer the lowest possible operating cost
Be clean-burning with low emissions.
Have a large water storage capacity to prevent short cycling (unless it has a modulating burner)
Be easy to service
Different Methods For Different Circumstances
Depending on a home’s structural design, two methods for installing radiant heat are generally employed: wet and dry systems.
Wet Systems:
Wet systems require the tubing to be embedded in concrete. Wet systems are usually found in basements, garages or slab-on-grade construction.
In some living areas, tubing is attached to the top of the sub-floor and then covered with a layer of lightweight concrete.
The benefit to this system comes with its high levels of heat output.
Its disadvantages, however, include:
Installation of hardwood floors become more difficult
Requires a minimum of 1-1/2″ inches of height
Moisture curing can be a problem, compromising the integrity of the flooring
Weight of concrete sometimes requires additional framing
Dry Systems:
Above the sub-floor:
Tubing can be installed on top of sub-floor with aluminum plates and plywood strips, called sleepers.
Dry systems such as these allow finished floor to be installed directly over the tubing.
A method superior to the sleeper system is the climate panel system, consisting of ½”inch plywood, seven or ten inches wide and 4 feet in length.
The panels are equipped with aluminum bonded to the underside. There is a groove in the center that accommodates PEX tubing.
Another product is Thermalboard. A 5/8” thick medium density fiberboard covered with aluminum and a groove that accommodates the tubing.
These panels can be applied on top of the sub-floor or a concrete floor, requiring only 1/2″ – 5/8” in height. The finished floor is applied directly on top of this system.
Advantages:
Excellent heat output
Requires a minimum of 1-1/2″ inches of height
Lightweight and low profile, no additional framing needed
Tubing is visible when nailing finished flooring
No moisture problems
Below the sub-floor:
Another dry method is tubing stapled beneath the subfloor with aluminum heat transfer plates.
This method enjoys most of the advantages of the top-of-the-floor system, except that heat output is lower due to the extra layer of flooring the heat has to travel through.
When used in new construction, care should be taken to avoid any punctures to the tubing.
This is not a problem for a competent flooring company.
Another commonly used dry method we don’t recommend is installing the tubing beneath the sub-floor with no aluminum heat transfer plates.
Because there is little thermal contact of the tubing to the floor, water temperatures have to be increased.
The overall performance of these systems can be very disappointing, especially in colder weather.
The exception to this rule is when you only want to warm the floor surface or want to supplement an existing heat source.
Mixing Valves:
Water temperatures created by heating boilers are usually in the 180-degree F range and are too hot for radiant heat applications.
Excessive temperatures can cause overheating of the space and damage to floors.
An effective way to lower the water temperature is by the use of a mixing valve.
Some mixing valves are set to a fixed temperature but the preferred method is a motorized, modulating valve.
These motorized units provide a higher level of comfort and economy of operation.
Controlling for Comfort
The traditional way to control the comfort of a building is to use a thermostat that turns the circulating pump and boiler on and off as the temperature in the room rises and falls.
The disadvantage of this method comes with the wide fluctuation temperatures, which often results in the feeling of being too hot or too cold.
This on/off strategy may also contribute to drying the floors.
Another method that has proven itself in Europe is to run the circulating pump continuously and vary the temperature of the water.
This is accomplished by using an outdoor thermostat that can increase the temperature of the water circulating through the floor as the outdoor temperature drops, and will decrease the temperature as outdoor temperatures rise.
This strategy puts just the right amount of heat into the house, eliminating wide temperature swings.
The difference is likened to stop and go city driving versus highway driving with cruise control.
The average water temperature in a climate controlled system is usually about 30 degrees less than if you were to use the on/off control system.
In addition to superior comfort, floors are better protected and energy savings of up to 25 percent can usually be expected.
Circulators or Zone Valves?
Another advantage of radiant heating is being able to put each room on its own zone, allowing you to control the temperature in various rooms independently.
This can be accomplished by using a circulator or zone valves for each room.
Using multiple circulators will increase electrical consumption by as much as 5 to 10 times versus the use of zone valves in some instances.
A typical circulator uses approximately 85 watts.
On the other hand, zone valve uses only 2 watts of electricity.
There has been the argument that if the circulator fails on a system that has only one circulator you are entirely out of heat.
The upside of radiant heat is that it takes a long time for the temperature to drop to a very uncomfortable level.
By the time this happens, the circulator will usually have been replaced.
Keep circulators to a minimum for maximum efficiency.
Communication is the Key
In order to get the results you should expect from your radiant system, there has to be good communication between the heat source and radiant system.
Rather than have a variety of controls by different manufacturers, systems should be integrated into one in order to avoid wiring and troubleshooting headaches.
Finger-pointing among building contractors is also eliminated if ever a problem arises.
You’ll Wonder How You Lived Without It!
This helpful guide to radiant heating contains the fundamental facts to put you on your way to enjoying warmth like you’ve never experience
You have two choices when it comes to business domain name research; it can be tough and frustrating or fun and pretty easy. If you’re not looking in the right direction, you may simply settle down for something that’s not worth it. You need to operate from a position of knowledge and informed state, if you want the best results. We can definitely get you pointed in the right direction so you will be armed to the teeth any time you search for domains. Pioneer AVH-P4300DVD, how to apply makeup , Traffic Voodoo 3.0
It’s easy to register a domaine
It can be easy to register a name only to find out there is a highly popular domain that is almost just like yours. So, before whipping out the plastic, do that if it matters to you otherwise skip it.
You know how important it is to stand out from all the rest in your niche. We see no good reason to almost be confused with another business related to the domain, and you really should have the same opinion. You will lose on traffic and it’ll be hard to create a brand when your domain name looks too common. Naturally, you never have to believe us, but how can you not see the logic in this suggestion? When you’re buying your domain name, buy it from a well known registrar. There are many scams going around on the Internet in the domain industry. If you want to be on the safe side, then see to it that your domain registrar is known. Get an idea about who it is that you are using to register your domain name. If you are not sure, ask questions. But don’t make the mistake of choosing whatever registrar comes your way, because that may just complicate things in the future. This will offer you some peace of mind knowing that your domain name is safe.
Keep Control over your Domaines
Make sure your register the domain name on your own, and not through someone else. You want your domain’s control and authority in your own hands. It’s important to be able to manage your domain name on your own and take whatever steps you want to take with it. When you want to register your domain name, don’t give any credence to a third party service. Even if you are partnering with another person for your online business, try to do the registering of the domain name yourself so that nothing can go wrong later on. It’s important to trust when you run a business because you ought not trust absolutely anybody who comes along. There are a number of reasons why your domain name might not live up to your expectations. Once you become aware, then it is impossible to go back, but why would you want to do that, anyway? Once you are confident that you know what to do, then you will proceed from a confident position. You can see that there is not anything hard about what you need to know, so just get a move-on with it. Learn, get the necessary facts you need, and then commit to positive action.
More information here: http://s-e-o-sa.com
Don’t forget to shop local: @ sanantoniolocalexperts.com
Visit this website
